LinerJet 300

---

LinerJet 300 has been specially developed for the rehabilitation of medium size pipes inside buildings and other places there it is difficult or not economical to use a big inversion drum or inversion tower.  Thanks to its small size and low weight, it is easy to carry and place at the work site.

The LinerJet 300 can be used to invert liners with diameters from DN150mm. up to DN300mm. Linerjet 300 is only limited by the working time of the resin used. (And what can be handled at the work site)

The multi adjustable mounting frame is easy to adapt to different conditions at the work site it is possible to tilt the LinerJet 300 almost 180 degrees from straight up to straight down. 

 

Max. working pressure 10 Bar. (145 psi.)

Min. working pressure 2,5 Bar. (36 psi.)

Min. air consumption 600 L/Min. (21 CFM.)

Pressure to bladder 0-1 Bar. (0-14,5 psi.)

Pressure to liner 0-1,5 Bar. (0-22 psi.)

Weight of LinerJet 300 31 Kg. (68,3 lb.)

Weight of mounting frame 9 Kg. (19,8 lb.)

Weight of inverting cone (DN300mm.) 3,7 Kg. (8,15 lb.)

---